 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MLVS Series MLVS-0603 Series This specification is applicable to Chip Metal Oxide Varistor in multilayer technology. Specifications 1.Rating(25O 5 J ) Peak Transient current energy imax Amps (Max.) 8/20s Wmax Joules (Max.) 10/1000 s VDC Volts (Max.) < 10 A Ir X106 ohm (Min.) 5 VDC Working voltage Resistance Symbol Units Test Condition MLVS0603M04 MLVS0603M06 MLVS0603M07 MLVS0603L08 MLVS0603K11 MLVS0603K14 VRMS Volts Features 1. Keeping low and stable leakage current. 2. Excellent assembly solderability. 3. Low clamping Voltage. 4. Quick response time (<1nSec.) 5. High transient current capability 6. Test Standard meets IEC 61000-4-2, 61000-4-4, and 61000-4-5. 4 6 7 8 11 14 5.5 8 9 11 14 18 10 10* 10* 10 10 10 * 30 30 30 30 30 30 0.1 0.1 0.1 0.1 0.1 0.1 Part Number SeriesType Elements Size Tolerance Vrms MLV MLV MLV MLV MLV MLV S S S S S S 0603 0603 0603 0603 0603 0603 M M M L K K 04 06 07 08 11 14 *Measured resistance at 3.3V DC VRMS - Maximum AC operating voltage the varistor can maintain and not exceed 10 A leakage current VDC - Maximum DC operating voltage the varistor can maintain and not exceed 10 A leakage current Ir - Resistance at 5 V DC imax - Maximum peak current which may be applied with 8/20us waveform without device failure Wmax - Maximum energy which may be dissipated with the 10/1000us waveform without device failure 2.Characteristics(25 O 5J Varistor voltage Symbol VV VV ) Clamping Voltage Vc Capacitance Cp Series Type / MLV -- Multilayer Varistor Elements / S -- Single Size /0603 --1.60x0.80x0.80mm3 Tolerance /M/L/K -- O 2 0%/ O 15%/ O 10% Vrms -- Working Voltage Vrms Dimensions L W T C C Volts % Volt (Max.) pF (typ.) Units 1mA DC 1KHz 1MHz Test Condition 1A 8/20s MLVS0603M04 8 19 300 270 20 MLVS0603M06 11 27 250 230 20 MLVS0603M07 12.5 27 235 205 20 MLVS0603L08 15 33 220 190 15 MLVS0603K11 18 35 160 140 10 MLVS0603K14 22 40 140 120 10 VV - Voltage across the device measured at 1mA DC current Vc - Maximum peak current across the varistor with 8/20us waveform and 1A pulse current Cp - Device capacitance measured with zero volt bias 1Vrms Electrical Characteristics 1.General technical Characteristics Operating temperature Storage temperature esponse time Solderability Solder leach resistance -55 ... +125J (85J ) -55 ... +125J (85J ) <1 ns 235J , 2s 260J , 10s 0603 L W T C 1.60 O 0.20 0.80 O 0.20 0.80 O 0.20 0.30 O 0.20 2. Environmental Characteristics Characteristics Bias humidity Thermal shock Vibration Specifications VV /VV O VV /VV O VV /VV O 10% 10% 10% 10% 10% Test condition 90%RH, 40J , Working voltage, 1000 hours -40J to 85J , 30 min. cycle, 5 cycles Unit : mm 10 to 50 to 10 Hz, 1 min. cycle, 2 hours each in X-Y-Z Working voltage, 25J , 1000 hours 260J , 10s VV /VV O Full load voltage Solder leach resistance VV /VV O INPAQ TECHNOLOGY CO.,LTD |
Price & Availability of MLVS0603M07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |